Proxxon 28510 12-Volt Rotary Tool Micromot 50/E Review

Proxxon 28510 12-Volt Rotary Tool Micromot 50/E
Average Reviews:

(More customer reviews)
The micromot arrived in a hard clear plastic package with hard cardboard back, I also bought the NG 2 transformer which is great. The unit is very easy to use, 3 of the collects arrived with small particles that avoided a snug fit of the bits... I cleaned the collects and issue resolved but that was not right. At low rpm (5,000) the drive have slow vibration due to the way the motor is manufactured, at 10,000 rpm the tool is more stable; when you adjust the speed within 17,000 and 20,000 rpm sometimes the tool have a vibration and unpleasant noise if the bit is not properly balanced. I own a Foredom flexshaft that goes from 0 to 18,000 rpm but it does have a lot of torque which cannot be compared with this little tool and the precision of the H30 handpiece makes no play on the bit it looks rock solid at high and low rpms. The proxxon works fine with small burrs, 3/32" and 1/8" but as far as the body of the tool does not exceed more than 1/4" beyond that the tool will suffer unbalance and the noise above 10,000 makes you feel that the tool is going to be tear apart. I bought this tool to do detail on my wood carving projects, may be I will use it from time to time; but now more than ever I really appreciate the craftmanship, precision machining and solid work that the people of Foredom do on the tools made in U.S.A.

Click Here to see more reviews about: Proxxon 28510 12-Volt Rotary Tool Micromot 50/E

The specialists for the intricate job! Simply a joy to use. 1-The MICROMOT standard 3/4" collar allows use in the Drill Stand MB 140/S, Router Base OFV, Universal Holder UHV and UHZ and Angle Adapter WS 90. 2-Stable housing of fibreglass reinforced POLYAMIDE. With soft gripping area for extended use during hours. Tried and tested on 1001 uses: milling, drilling, routing, de-scaling, polishing, cutting, cleaning, sawing, engraving, etc. This is due to a number of factors: The diameter of only 1 3/8" makes the tool very easy to handle. Its weight of 1/2 lb, its quietness and effortless, vibration-free drive via the special permanent magnet motor, the ground spindle and collar bearing all contribute to the ergonomic design. An efficient cooling system facilitates extended use under various load conditions. The high quality, triple-slit steel collets ensure accurate clamping of the cutters and a very high concentricity. The size of the machine dictates a 12V drive system, use of a transformer is thus required. For milling, drilling, routing, polishing, cutting, cleaning, sawing, engraving, etc. The tools are useable on any workable material e.g. steel, precious metals, glass, ceramics, plastics, precious stones, etc. They are ideal for model builders, woodcarvers, electronic hobbyists, tool and die makers, jewelers, opticians, artists, dental technicians, etc. The 12V supply allows the safe use of coolant, e.g. when grinding and cutting semi-precious stones. Mill/Drill Unit MICROMOT 50/E The electronic speed-control enables the selection of speeds from 5,000 to 20,000 rpm. Phase angle control and feedback effect circuitry yield high torques, even at low speeds. Six MICROMOT collets for shanks covering 1/32", 1/16'', 5/64'', 3/32", 7/64" and 1/8" are supplied. Power consumption is 40W max., length 8 21/32" and weight 1.2lb. Mill/Drill Unit MICROMOT 50 As 50/E, except without speed control. Speed control via power supply NG 5/E. No load speed is 20,000 rpm.

Buy NowGet 20% OFF

Click here for more information about Proxxon 28510 12-Volt Rotary Tool Micromot 50/E

0 comments:

Post a Comment