Dremel 212 Moto-tool Drill Press Stand # Review

Average Reviews:

(More customer reviews)I purchased one of these to make my dremel into a drill press for wood - mostly softwood and it has been a terrible experience. The collars that attach the tool do not allow for perfect square alignment and the dremel many times cant seat a bit so there is no wobble. I was disappointed with this tool. I found that MicroMark makes a small hobby drill press (as well as other great tools) that is sturdy, reliable and excellent. It maycost more then the dremel but you do get what you pay for.

Click Here to see more reviews about: Dremel 212 Moto-tool Drill Press Stand #

Can be used as a drill press Drills perpendicular and angled holes in 15 degree increments up to 90 degrees horizontal Tool holder holds tool at 90 degrees horizontal for tasks such as polishing metal objects, sanding different shapes and grinding metal pieces Flex shaft tool stand allows telescopic adjustment to any height between 16 and 29 inches Crow's nest provides on- board storage for drill bits, wrenches and other Dremel accessories Cord management clips for safe storage of power cords Inch and metric marking on base for accurate drilling of workpiece Depth markings with depth stop for consistent depth adjustment Sturdy metal base with 4 clamping points to securely hold workpiece Includes: work station attachment, mounting wrench and instructions

Click here for more information about Dremel 212 Moto-tool Drill Press Stand #

Palmgren 11351 AVC35 Angle Vise, 3.5-Inch (4-Inch) Review

Average Reviews:

(More customer reviews)I purchased this item through Amazon to go with my milling machine and expected an American made product. Instead Palmgren has gone to China and I got an inferior Chinese manufactured vise with a stamped Palmgren nameplate. Vice was dirty and painted a sooty gray, not the American green as shown in picture. Machining and castings were not up to US standards. Two year warranty instead of lifetime for US manufactured vise. In short, disappointed. Amazon needs to properly represent what it sells.

Click Here to see more reviews about: Palmgren 11351 AVC35 Angle Vise, 3.5-Inch (4-Inch)

Angle VisesType: AngleJaw Depth: 1-1/2Jaw Width: 4Jaw Opening: 4

Click here for more information about Palmgren 11351 AVC35 Angle Vise, 3.5-Inch (4-Inch)

Proxxon 38481 IB/E Professional Rotary Tool Review

Average Reviews:

(More customer reviews)I bought the Proxxon instead of the Dremel. The Proxxon is very quiet compared to the Dremel which is screaming loud at high RPM. The Proxxon appears to be extremely rigidly built unlike the Dremel. It weights about a pound and has about the dimensions of the 300 Series Dremel. You can change the speed from 5k to 20k RPM and the motor is wave controlled to maintain its speed under load - unlike the Dremel which slows down under load. It comes with a set of drills and milling bits as well as cutting wheels. I also bought the drill stand MB 140/S and vice MS 4. The bits appear to be well priced. Notice that Amazon sells many of the bits in kits (as noted in the product descriptions) while most other places sell just a single package of the bits. Dremel bits should fit as well but I did not try this. I am intending to use it for regular repair jobs around the house. The only bad thing I noticed is that the case does not keep things in place when you carry it and you better put the bits in a little baggy instead of the included bit holder. I bought the Proxxon because this unit is regularly used for industrial applications over many hundred of hours while many people reported that they fried several Dremel units at simple jobs like cutting into dry wall.
A small rotary tools is extremely versatile and you can do a lot of things with it like drilling, grinding, sanding, polishing, milling, cutting (sawing), engraving, or routing in many materials like ferrous metals, precious metals, stone, glass, plastic, or wood. There is a bit for every material and job. Most bit kits are useless as they include a lot of cheap tools such as sanding disks. Buy the right bit for the right application. You do not need many different bits. Cheap bits wear out immidiately and are a waste of money. You do not have to buy Proxxon bits - you can use any bits with fits the collier sizes and works with the rotation speed but Proxxon bits are reasonably priced and are of very high precision and quality.

Click Here to see more reviews about: Proxxon 38481 IB/E Professional Rotary Tool

Featuring a variable-speed motor and a stabilizing, ball-bearing assembly, the Proxxon IB/E Professional Rotary Tool is ideal for a wide range of hobbies and professional projects. Lightweight, quiet, and capable of high torque even at low speeds, this well-balanced rotary tool includes 34 accessories that can be used for grinding, polishing, engraving, and more.
A handy storage case is included.Ideal for a Wide Range of Hobby ProjectsWith an electronic speed control and 34 industrial-quality bits and cutters--including six, triple-slit steel collets covering 1/32-inch to 1/8-inch (1.0 to 3.2 millimeters)--this versatile rotary tool is the ideal addition to any workshop. It can be used for a wide range of projects that require intricate detail work like carving, etching, or engraving.
Variable-Speed Motor for Multiple UsesThe IB/E features a variable-speed motor that operates from 5,000 to 20,000 RPM and performs with high torque even at low speeds. The IB/E can be used for extended periods of time at low speeds for projects that require brushing and cutting, or at high speeds for heavy-duty jobs that require grinding and milling.
Quiet, Vibration-Free OperationThe IB/E features a quiet 1/8-horsepower motor that is specially balanced for minimal vibration, allowing you to use it comfortably and with stability, even while working on intricate details at maximum speeds. The streamlined die-cast aluminum head supports the exact positioning of the ball-bearing assembly. With a slim form and weighing just 1.3 pounds, the tool is easy and comfortable to handle.
What's in the BoxRotary tool, 34-piece accessory set, six triple-slit steel collets, and storage case.

Get 4% OFF

Click here for more information about Proxxon 38481 IB/E Professional Rotary Tool

Dremel PL400 XPR Planer Attachment Review

Average Reviews:

(More customer reviews)Makes reasonably quick work of trimming a door edge that rubs, but doing a neat job takes some practice. Heavy touch up sanding will be required.
This Dremel attachment is like every other Dremel attachment I have been suckered into buying, it is clearly designed by bean counters. It works just good enough that I would feel bad about throwing it out. For $20, it is a nice tool to have, but I would gladly pay more for one that had a better guide and did a neater job.
A couple specific gripes:
1. The 1/64th depth isn't off by a bit, it is off by a factor of 4. It planes nearly a 1/16th off per pass. I'm still trying to figure out how they came up with the 1/64th number.
2. The guide is useless, it is up to the user to attempt to keep the tool flat on the surface. This takes some practice and will result in some gouges and uneven planed surfaces that need to be smoothed off with sanding.


Click Here to see more reviews about: Dremel PL400 XPR Planer Attachment

The new Dremel XPR planer attachment shaves approximately 1/64 inch at a time so you can control the amount of material being removed. The 2 1/4-inch cutting surface is ideal for woodworking projects, and the hardened high-speed cutter has been tested to over 500 linear feet. This great tool is designed to perform planing tasks on sticking doors, picture frames, woodworking projects, hardwood flooring, laminate countertops and much more. The long-lasting, precision-ground blade slices at speeds up to 35,000 rpm to produce a smooth surface that's free of milling marks.

Get 37% OFF

Click here for more information about Dremel PL400 XPR Planer Attachment

Dremel 565 Multi Purpose Cutting Kit 565D Review

Average Reviews:

(More customer reviews)I bought this specifically for cutting holes in drywall for electrical boxes, but I have since found that it has many uses beyond that.
What I have found:
- As someone else has stated, the depth gauge is a little inaccurate. You will have to sight the depth for this (which is best anyway.)
- Made of quality materials. You've come across that cheap plastic before; this is not that stuff. This has taken a few drops, so far.
- The drywall bits seem to wear out quicker than I planned on. I have only cut 10 holes for electrical outlets and it seems to take longer to cut each time I use it. The first hole I cut went fast and smooth; whereas the last one that I just cut took three times as long, and twice as much pressure.
- The bit will tend to 'walk' if you don't have firm control over it. (I know, I know, this seems obvious, but maybe not to everyone.) Use of a guide or fence should help control the outcome of your results.
- Does NOT tear drywall. Smooth cuts on both sides -- smoother than my Greenlee drywall/keyhole saw.
- You'll need to use the mini-chuck with the guide. The bigger chuck won't allow the guide to screw down. (I think everyone got one with their main Dremel unit, but I'm not sure.)
- Holding a vacuum hose or air nozzle to one side of the guide will greatly increase your sight. This thing kicks up some serious dust, and unless the light is good, the line you're following may be difficult to see.
I highly recommend this product for those finish cuts on drywall where a saw just won't leave the edges smooth. If you plan on cutting more than 20 holes in drywall, I'd pick up another bit or two.

Click Here to see more reviews about: Dremel 565 Multi Purpose Cutting Kit 565D

The drywall bits allow you to quickly cut drywall for electrical boxes, air vents and other wall features. It's best to use drywall bits in a clockwise direction. The multipurpose cutting bit prepares an area for light fixtures and ceiling fans and makes cut-outs in cabinets, paneling and fiberglass. Includes: a cutting guide attachment; two drywall cutting bits; and one multipurpose bit.

Get 30% OFF

Click here for more information about Dremel 565 Multi Purpose Cutting Kit 565D

Dremel EZ406 1 1/2-Inch EZ Lock Rotary Tool Cut-Off Wheel and Mandrel Metal Cutting Starter Kit Review

Average Reviews:

(More customer reviews)This is the Dremel accressory that I've been looking for. A great little metal cut-off wheel. Sturdy, cuts through small nuts and bolts, and does not seem to break. It fits in tight places, and is perfect for the handyman with demo. problems. It is not going to cut through rebar, but most Dremel users already know that. Forget those little waffer disc's. The quick change mandrel is a bonus!!

Click Here to see more reviews about: Dremel EZ406 1 1/2-Inch EZ Lock Rotary Tool Cut-Off Wheel and Mandrel Metal Cutting Starter Kit

If you regularly use cut-off wheels for your crafting and repair jobs, the Dremel EZ406 EZ Lock Starter Kit is a must-have addition to your home shop or crafting room. By providing faster and easier mandrel-mounted accessory changes without a screwdriver, this kit helps save you time and effort so you can focus on your projects.
Compatible with all Dremel rotary tools, the EZ406 makes accessory changes as easy as one, two, three.View larger.Easy 1-2-3 Bit Changes Without a ScrewdriverCompatible with all Dremel rotary tools, the EZ406 is the first patented system of its kind. It makes accessory changes as easy as one, two, three. Just pull, twist, and release! Its one-piece mandrel design eliminates the need for a screwdriver and simplifies the process of changing cutting wheels, making it a snap to cut through a range of materials from metal to plastic.
One-Piece Design for Quick Wheel ChangesThe EZ406 EZ Lock Starter Kit contains the EZ402 mandrel and five EZ456 cutt-off wheels. The innovative, one-piece design of the EZ402 mandrel makes it easy to EZ Lock compatible accessories--even when you're wearing gloves! With the EZ402, locking and loading is an effortless process that does not require holding the cut-off wheels in place with a screw. This saves you the worry of losing those tiny mandrel screws, and it saves you the time spent using a wrench to tighten them.
Long-Lasting, Labeled Cut-Off WheelsDesigned for reliable performance year after year, the EZ406 includes five EZ456 cut-off wheels that last two times longer than fiberglass-reinforced cut-off wheels. They also lock in place quickly and are labeled for easy identification to ensure you have the right wheel for the job.
Versatile Design for FlexibilityThis set gives you the flexibility and solid performance you need to complete a range of hobby, repair, and renovation tasks. Use the EZ406 to cut through metal conduit and PVC piping, re-slot screw heads, remove rusty nail heads, or tackle light demolition jobs. With the EZ406 you can also cut aluminum and power through nuts and bolts.
About Dremel: A History of Brilliance and InnovationFounded in 1932 in Racine, Wisconsin, Dremel is the industry leader in rotary tools. The company owes its success to the inventive genius of its founder and namesake, Albert J. Dremel. In his lifetime, Mr. Dremel owned 55 patents on a wide range of products from electric erasers to a gas-powered rotary lawn mower. His most famous and important invention was a high-speed rotary tool, dubbed the Dremel Moto-Tool. Compact, lightweight, and perfect for a wide range of jobs, the rotary tool was an immediate hit with hobbyists and eventually became accepted as one of the greatest inventions of the 20th century. Today, the Dremel name remains synonymous with utility, durability, and innovation.
What's in the BoxEZ402 mandrel and five EZ456 cutting wheels

Get 30% OFF

Click here for more information about Dremel EZ406 1 1/2-Inch EZ Lock Rotary Tool Cut-Off Wheel and Mandrel Metal Cutting Starter Kit

Proxxon 24260 Precision Machine Vise for MF 70 Review

Average Reviews:

(More customer reviews)This solid steel machine vise is one of the best made and can be one of the handiest machine vises for any mini or micro mill, as well as an insert vise for larger vertical mills. I have used one for over 6 years and have been more than satisfied with it for more than 6 years. I just ordered two more. The original one was made in Germany and came in a very nice wooden box. I hope they are still made in Germany.
Until recently, I have basically used it for drilling on my drill press, because the hold down slots using M6x1 hex headed screws and using a 10mm open end wrench is very arkward. I recently drilled a couple of 1/4 inch holes right above the screw position trough the bottom jaw surface of the vise and used 10-32 socket headed set screws. The steel is not hardened and any high speed steel drill bit will work. This allows me to use 10-32 square nuts with my Proxxon MF70 mill, standard T-nuts with my Taig Micro-Mill, standard T-nuts with my Sherline mill, any T-nut supplied by A2Z-CNC with any other mini or micro mill. This vise, with my modification, handily and easily mounts on my Sherline 4 inch rotary table.
I have gone through many imported vises of the so called "screwless variety" and still often use the Sherline #3551 model. The precision machined right angle parallel sides allows for easy squaring onto the mill table, just like ant precision screwless machinist vise. While it might not be as good at preventing "movable jaw rise" as the screwless type, with my modification, the Proxxon is a real pleasure to use and it provides faster clamping and unclamping of parts for low volume production.
Update: September 9, 2010.
Yes, this vise is still made in Germany and comes in a slide top box. With custom "T" slot nuts, a have found this vise to nbe one of my favorites. I now own three of them. I so small ot production of specialty items and tooling. This has to be one of my favorites. It's worth evey cent. You get what you pay for - precision German Made product that is second to none.

Click Here to see more reviews about: Proxxon 24260 Precision Machine Vise for MF 70

Precison machine vise for MF 70. Proxxon tools come with a 2 year factory warranty.

Get 3% OFF

Click here for more information about Proxxon 24260 Precision Machine Vise for MF 70